Dual-Arm Monitor Stand

$96.00 AUD $134.00 AUD

Dual-Arm Monitor Stand

Name: Dual-Arm Monitor Stand
Brand: Novva Living
SKU: 4871258032925-V2
Price: 96.00 AUD
Availability: InStock

$96.00 AUD $134.00 AUD

Shipping calculated at checkout.

Novva Living · Computer & Office

Two screens. One stand. Every angle, dialled in.
The LS-2 Dual-Arm Monitor Stand for 13–27″ screens.

The LS-2 Dual-Arm Monitor Stand clamps to any desk edge and raises two monitors to eye level on independent fully articulating arms — tilt ±90°, swivel ±90°, rotate ±180°. Fits 13–27″ screens with VESA 75×75mm or 100×100mm mounts. 19.8 lbs (9 kg) capacity per arm. 29.5″ total arm span. Black.

Dual independent arms — both monitors at the exact position needed

The two arms move entirely independently — one can be at eye level for a primary screen while the second is angled lower for reference material, or both can be aligned perfectly side by side. The independence that a single crossbar stand cannot provide, because adjusting one side moves the other.

Full articulation — tilt, swivel, and rotate on every arm

Each arm offers tilt ±90°, swivel ±90° at three separate joints, and portrait/landscape rotation ±180° — the range of adjustment that allows each monitor to be positioned precisely for the user’s seating position, task, and preference, rather than accepting whatever angle a fixed or single-axis stand provides.

Desk surface freed — usable space under both screens

Mounting both monitors on arms removes two separate monitor bases from the desk entirely, recovering the full surface area beneath each screen. Space that becomes available for a keyboard, documents, a laptop, or simply a clear working surface — the desk reclamation that a monitor riser or shelf cannot achieve because it occupies the surface rather than freeing it.

Height adjustable along the centre pole — set once, leave it

Both arms slide and lock along the 16.2″ centre pole, allowing the entire rig to be raised or lowered to the correct ergonomic height for the user’s chair and desk combination. The locking mechanism holds the chosen height without drifting — the stability that means the monitors stay exactly where they were positioned rather than gradually dropping back to reintroduce the neck strain the stand was purchased to eliminate.

C-clamp desk mount — installs in minutes, no tools required

The C-clamp base fixes to desk edges up to standard thickness using a tightening bolt — no drilling, no permanent fixings, and no damage to the desk surface. Installs and removes without tools in a matter of minutes, making it practical for rented offices, shared desks, or any workspace where permanent wall or desk modifications are not possible.

ModelLS-2

ColourBlack

Screen Size13–27 inches

VESA Compatibility75×75mm · 100×100mm

Weight Capacity19.8 lbs (approx. 9 kg) per arm

Tilt±90°

Swivel±90° (3 swivel joints per arm)

Rotation±180° (portrait · landscape)

Arm Span29.5″ (75 cm) total width

Centre Pole Height16.2″ (41 cm)

Mount TypeC-Clamp Desk Mount

Product Weight2.8 kg

Before ordering, confirm your monitors have a VESA mounting pattern and check the weight of each screen.

VESA pattern: this stand is compatible with VESA 75×75mm and 100×100mm mounting patterns. Check your monitor’s manual or the rear panel for the VESA specification — it will be labelled as “VESA 75” or “VESA 100” with a grid of four screw holes in the corresponding spacing.
Screen size: fits 13 to 27 inch monitors. Screens outside this range may not mount safely.
Weight per arm: maximum 19.8 lbs (approx. 9 kg) per arm. Check your monitor’s weight in its manual or on the manufacturer’s website before mounting.
Non-VESA monitors: some monitors — particularly all-in-ones and certain ultrawide screens — do not have VESA mounts. Check before purchasing. VESA adapter brackets are available separately for some non-VESA monitor models.

If your monitor’s VESA pattern or weight is not listed in the manual, search the model number on the manufacturer’s website or contact their support team to confirm before mounting.

Position the C-clamp base at the chosen location on the desk edge. Slide the clamp jaw under the desk and tighten the bolt from below until the base is firm and does not shift when pressed.
Slide the centre pole into the base and lock it at the desired height using the locking collar.
Attach both arms to the centre pole at the desired height positions and lock each in place.
Attach the VESA mounting brackets to the rear of each monitor using the bolts provided — use the M4 bolts for 75×75mm patterns and the M4 or M6 bolts for 100×100mm patterns, depending on your monitor’s thread specification.
Click or slide each monitor bracket onto the arm head and tighten the connecting bolt until the monitor holds its position without drooping.
Adjust the tilt, swivel, and rotation of each monitor independently until both are at the correct eye level and angle for your seated position.
Route cables along the arm channels if provided, or use cable ties to keep cables clear of the adjustment joints.

Check all locking bolts are fully tightened before placing monitors. A partially tightened joint will allow the arm to drift and the monitor to drop gradually during use.

Monitor height: the top edge of the screen should be at or very slightly below eye level when seated in your normal working position. This keeps the neck in a neutral position and reduces strain during long sessions.
Monitor distance: position each screen at arm’s length — approximately 50–70 cm from your eyes. Screens that are too close cause eye strain; screens that are too far require leaning forward.
Dual monitor angle: for setups where both screens are used equally, angle each monitor inward at a slight angle so both are equidistant from the eyes when looking straight ahead. For a primary and secondary screen setup, position the primary directly in front and the secondary at a 30–45° angle to the side.
Tilt: tilt each monitor back 10–20° from vertical to reduce glare from overhead lighting and match the natural downward angle of the eyes when looking at a screen at eye level.

Two monitors. Every angle.
Add to bag.

Dual independent arms, full tilt/swivel/rotate articulation, VESA 75×75 and 100×100mm, 13–27″ screens, 19.8 lbs per arm, C-clamp desk mount. The stand that makes a dual-monitor setup feel designed, not assembled.

Dual Arm Full Articulation 13–27″ VESA