Square Mini Heater
Grey · With Remote
$37.00 AUD
Novva Living · Home Essentials
Square Mini Heater.
A compact 200W wall-mounted or portable heater with touch control, temperature display, and a 2–8 hour timer — quiet at 36–45 dB, short-circuit protected, and sized for desks, offices, and rooms up to 10 m². Available with or without remote control. Grey. US plug, 220V.
200Watts Output
8hrMax Timer
45dBMax Noise Level
10m²Coverage Area
Touch ControlTemperature display included
2–8hr TimerTurns off automatically
Quiet 36–45 dBWork, sleep, office use
Wall or PortableMounts or freestanding
01 Touch Control & Temperature Display — Set It at a Glance
The touch panel allows the heater to be turned on, adjusted, and timed without physical buttons that collect dust or wear out, while the temperature display shows the current room temperature at a glance — making the heater practical to operate from across the room based on actual conditions rather than guesswork.
02 2–8 Hour Timer — Turns Off Without Being Remembered
The programmable timer can be set for anywhere between 2 and 8 hours, allowing the heater to switch off automatically — the timer function that matters most for overnight use, for heating a room before arrival, or for any situation where the heater needs to run for a fixed period rather than being left on indefinitely.
03 36–45 dB Noise Level — Quiet Enough to Work Beside
The operating noise level of 36–45 dB is comparable to a quiet library or a soft conversation — practical for use in an office, a bedroom, or any space where background noise from a heating appliance would be distracting, without the white noise that many fan heaters produce at higher output levels.
04 Wall-Mounted or Portable — Fits Any Setup
The square form factor mounts flush against a wall to save floor and desk space, while also being compact enough to be used as a freestanding portable heater on a desk or shelf — practical for rented spaces, offices, or any room where wall mounting is not possible or preferred.
Product Specifications
Rated Power200W
Voltage220V · US Plug
OperationTouch Control
DisplayTemperature Display
Timer2–8 Hours
Noise Level36–45 dB
Coverage AreaUp to 10 m²
SafetyShort Circuit Protection
ColourGrey
VariantsWith Remote Control · Without Remote Control
- Plug into a 220V socket using the supplied US plug — ensure the socket and adaptor are rated for the voltage before use.
- Press the touch panel power button to turn on — the temperature display will illuminate showing the current room temperature.
- Use the touch controls to adjust the target temperature and fan speed to the desired level.
- Set the timer using the timer button — select between 2 and 8 hours for automatic shutoff. The heater will count down and power off at the end of the selected period.
- If using the remote control variant, all functions can be operated from across the room without approaching the unit.
Do not cover the heater or place items on top of it during use. Keep the area around the unit clear of curtains, paper, and other flammable materials. The short-circuit protection will cut power automatically in the event of an electrical fault.
- Wall mounted: fixing the heater to the wall frees up floor and desk space entirely, positions the heat output at a consistent height, and gives the unit a permanent, considered place in the room rather than sitting on a surface.
- Freestanding portable: place on a flat, stable desk or shelf surface with the heat output directed into the room — the compact square form sits stably without a bracket and can be moved between rooms as needed.
- Wall mounting is recommended for permanent installations in a single room — portable use is preferable for renters, shared spaces, or where the heater will be moved between locations.
Wall mounting hardware requirements will vary by wall type. Ensure fixings are appropriate for the wall material and that the bracket supplied or sourced can support the unit weight securely.
- With remote control: all functions — power, temperature, timer, and fan speed — can be operated from across the room without approaching the unit. This is the recommended option for wall-mounted installations, bedroom use, or any placement where reaching the touch panel would be inconvenient.
- Without remote control: all functions are operated via the touch panel on the unit itself. This is the practical choice for desk or counter placement where the unit is always within arm’s reach.
- Both variants are identical in function, output, and appearance — the choice is determined solely by whether remote operation is needed for the intended placement.
- A practical winter gift for anyone in a cold office, a study, or a room without sufficient central heating — the quiet operation and timer make it immediately usable without adjustment or learning curve.
- Suitable for renters who cannot install a fixed heating appliance — the freestanding form requires no permanent fixings and can be taken when moving.
- Works as a supplementary desk heater for anyone whose office heating is inadequate or inconsistent — the 200W output is sufficient for personal warming at desk distance without heating the entire room.
- The remote control variant is particularly well suited to bedroom use, where the timer and remote allow the heater to be controlled from bed without getting up.
The Idea
“A heater too loud to run while working, a wall unit that requires installation, and a portable heater that takes up floor space are three versions of the same problem — a 200W square mini heater that mounts to a wall or sits on a desk, runs quietly, and turns itself off on a timer is the heater that fits any space without compromising it.”
Touch Control 2–8hr Timer Quiet 36–45 dB
Square Mini Heater
$37.00