About this product
Wood Grain Self-Adhesive Wall Sticker
A 3D wood grain self-adhesive panel for skirting, wall skirts and decorative interior details. Each panel measures 70 × 70cm and covers 0.49m². Choose Cedar for a lighter neutral finish or Red & Yellow Wood Grain for a warmer, richer look.
- 70 × 70cm per panel
- 0.49m² coverage per panel
- Peel-and-stick installation
- Waterproof 3D textured surface
Installation
- Clean away dust, grease and loose paint, then allow the wall to dry completely.
- Let the panels reach room temperature for around 30 minutes, especially if they have been stored somewhere cold.
- Dry-fit panels first and use a level or pencil guideline when creating a row.
- Peel back a small section of backing, position the panel, then press from the centre outward with a flat tool to remove air bubbles.
- Align the grain at each edge before pressing down the joins. The grain runs horizontally.
- For initial repositioning, work quickly before the adhesive fully bonds. Removed panels may not re-adhere reliably.
Smooth painted plaster, smooth plasterboard, tiles and glass are listed as suitable surfaces. Test an inconspicuous area first.
Pattern guide
- Cedar: a lighter, neutral wood tone for modern, minimal and Scandinavian-inspired interiors.
- Red & Yellow Wood Grain: a warmer, more decorative grain for traditional, eclectic or richer interiors.
- Dry-fit side by side before committing to a wall run, and order enough panels to keep the grain direction consistent.
Cleaning and care
- Wipe with a damp cloth for dust, splashes and everyday marks.
- Use a small amount of mild household cleaner on a soft cloth for stubborn marks.
- Avoid abrasive pads, solvents and strong chemical cleaners that can dull the texture or lift the edges.
- Do not soak the surface or allow water to sit in panel joins. Wipe dry after cleaning in splash-prone areas.
Removal
- Lift one corner and peel slowly at a low angle rather than pulling straight away from the wall.
- In cold conditions, gently warm the panel with a hairdryer on a low setting to soften the adhesive.
- Test rubbing alcohol or adhesive remover in a hidden area before treating any residue on painted walls.
- Removed panels may not bond again reliably, so measure and dry-fit carefully before the final application.
Adhesive removal can affect paint or plaster. Work slowly and test first, especially on freshly painted or delicate surfaces.
Coverage and specifications
- Panel size
- 70 × 70cm
- Coverage
- 0.49m² per panel
- Construction
- 3D self-adhesive panel
- Surface
- Wood grain texture
- Properties
- Waterproof · Moisture-resistant · Anti-collision
- Patterns
- Cedar · Red & Yellow Wood Grain
- Suitable uses
- Skirting board · Wall skirt · Ceiling edge · Living room · Bedroom
- In the box
- 1 × 70 × 70cm self-adhesive wall sticker panel
A warm 3D wood finish without the tools, paste or permanence of real timber cladding.
Delivery & returns
See our Shipping & Delivery and Return & Refund Policy pages for current details.
People also browsed