Aluminium Alloy Adjustable Bath Stool with Cushion

Product details

An aluminium alloy bath stool with a cushioned seat and telescopic height adjustment described. The listed seat measures 52 × 31cm, with a height range of 41–53cm, for seated bathing where suitable for the user and bathroom.

More information

• Listed frame material: aluminium alloy, described as lightweight and rust-resistant. Actual weight and corrosion-test details are not provided.
• Listed seat size: 52 × 31cm.
• Listed height range: 41–53cm with telescopic adjustment.
• Seat: cushion included. Cushion material, removability and validated pressure-relief properties are not established in the current details.
• Included: one Aluminium Alloy Adjustable Bath Stool with Cushion.
• Maximum user weight: not stated. Confirm the manufacturer’s verified load limit before purchase or use.
• Fit and grip: full leg footprint, foot construction and tested slip resistance are not specified. Seat dimensions alone do not establish fit inside a bath or shower tray.
• User suitability: the existing description suggests older adults, pregnancy, reduced mobility and recovery. Suitability is individual; these categories do not establish that this stool meets a particular user’s support or transfer needs.
• Height setup: adjust only while unloaded, following the supplied instructions. Where appropriate for the user, set the seat so feet rest securely on the floor and knees are comfortable. Engage every leg lock and check the stool is level before sitting.
• Placement: use only on a suitable, stable, level surface with secure contact at every foot. Do not assume wet floors provide adequate grip.

Features

• Aluminium alloy frame listed.
• Telescopic 41–53cm height adjustment described.
• 52 × 31cm seat dimensions listed.
• Cushioned seat.
• Seated bathing format.

Use and safety

• Confirm essential limits: do not use until the manufacturer’s instructions and verified maximum user weight are available and suitable for the intended user.
• Seek advice from a qualified healthcare professional or occupational therapist if the user needs transfer assistance, post-surgical positioning, pressure care or support to remain seated safely.
• Check all height locks, joints, feet and the cushion before every use. Stop if the stool rocks, slides, changes height under load or shows loose or damaged parts.
• Use required assistance and properly installed, suitable grab rails according to the user’s care plan. Do not assume a wall, towel rail or the stool itself is a safe transfer support.
• Do not stand on the stool, use it as a step, lean in a way that could tip it or exceed the verified load limit.
• Do not adjust the height while occupied. This stool is not established as a transfer aid or guaranteed fall-prevention device.

Care

• Follow the delivered cleaning instructions. The existing guidance recommends rinsing the frame after use and wiping the cushion with a damp cloth without submerging it.
• Remove soap residue from contact surfaces and feet, and dry thoroughly before storage.
• Inspect locks and joints regularly for wear or corrosion. Rust resistance does not eliminate maintenance needs.
• Do not modify the stool or fit unapproved components. Stop use if structural condition or stability is uncertain.